In addition, before plywood is so popular, tongue and groove assembly method was also applied for sheathing buildings. Some concrete formwork constructions are also completed with this concept. The concept is simply assembling the tongue (a plank with deep ridge) and the groove (a plank with a slot). This method does not need glue because the joint is tight enough without being glued. It is also to make the construction, such as tongue and groove ceiling, can be more easily taken apart. It looks simple to make the assembly, but you still need the following detail instructions for the best result.
After the strips are well installed, you can start installing the planks. Remember, you need to start with the groove that faces the wall and the tongue which faces out. Secure the first installation by using framing tool. Then, follow with the next groove that is fitted to the first tongue. Continue this construction of tongue and groove ceiling until you connect some number of planks because you need to secure the planks that you already install. To secure the planks, you need to attach a tapping block to the tongue. Slowly but surely, you should hit the block using a hammer. Be careful, because if you hit the tongue, you can’t interlock it to the next groove.
All graphics and other visual elements as well as any sign reproduced on the display products reproduced on the Website belong to their respective owners and users and is provided AS IS for your personal information only. Copyright © 2004–2017 Beyondbibamovie.com.